As you can see in the Photo, this Industrial Roller Door isn’t hanging how it was intended by the Manufacturer. Sadly, it was impacted by a Truck and has completely come away from the Wall and is hanging rather dangerously. Industrial Roller Doors are often hit when the Roller Door isn’t raised high enough for Vehicles to travel under, or the Driver forgets to check the Height clearance before driving under. This Industrial Roller Door in the Adelaide region has to be repaired rather quickly to stabilise it from falling completely to the ground, risking chance of personal Injury or Death. The Professional Service Technicians of Integrity Doors & Engineering, specialise in prompt attendance, especially in urgent situations such as this. The Roller Door wall bracket will be re-attached securely using heavy duty Dyna Bolts, using new holes. The Roller Door guides will be re-aligned vertically and re-secured to the wall to enable smooth operation and then the Industrial Door Springs will be re-tensioned correctly, to assist the Motor to lift the Door. The Industrial Roller Door Motor will then also be re-attached to the Wall and the top and bottom Limits set to enable the Roller Door to Open to the required Height and Close to the correct level without over closing. Lastly, any minor dents will be panel beaten and the Roller Door Guides cleaned and Lubricated before finally testing the Operation of the Roller Door.